Quick answer: House wiring in Pakistan costs between Rs 800 and Rs 2,500 per point in 2026, depending on your city, wire quality, and whether you're doing new wiring or rewiring an existing home. A standard 3-bedroom house typically runs 40–60 points, putting the total wiring cost between Rs 50,000 and Rs 150,000 for labor and materials combined.
Electricians quote jobs "per point" — not per room, not per meter. If you don't know what a point is or what the going rate looks like in your city, you'll overpay. This post breaks down exactly what a wiring point is, what it costs in 2026, how new wiring differs from rewiring, and how to estimate your total bill before anyone sets foot in your home.
What Is a Wiring Point?
A wiring point is any single electrical outlet, switch, or fixture connection in your home. Each switch, each socket, each light fitting — that's one point.
Here's how points are typically counted:
- One light switch = 1 point
- One power socket (outlet) = 1 point
- One ceiling fan connection = 1 point
- One AC connection = 1 point
- One light fixture = 1 point
A single room with one fan, two lights, two sockets, and one switch board usually contains 5–7 points. Multiply that across your home, and you'll see why point count matters so much when estimating costs.
House Wiring Cost Per Point in Pakistan in 2026
Labor rates for house wiring range from Rs 800 to Rs 2,500 per point in 2026, depending on the city and the complexity of the job.
|
City |
Labor Rate Per Point (2026) |
|---|---|
|
Lahore |
Rs 900 – Rs 1,800 |
|
Karachi |
Rs 1,000 – Rs 2,000 |
|
Islamabad / Rawalpindi |
Rs 1,200 – Rs 2,500 |
|
Faisalabad |
Rs 800 – Rs 1,500 |
|
Peshawar / Quetta |
Rs 700 – Rs 1,400 |
These are labor-only rates. Materials — wire, conduit, switches, sockets, distribution boards — are billed separately.
If an electrician gives you one combined "per point" rate that includes materials, ask for an itemized breakdown. Without it, you can't verify what wire quality you're getting or whether the material markup is reasonable.
New Wiring vs. Rewiring: What's the Price Difference?
Rewiring costs 30–60% more than new wiring for the same number of points. The extra cost comes from labor — breaking into walls, removing old wiring, and replastering adds significant time.
New wiring (in a construction phase home):
- Wiring runs through open walls before plastering
- Faster installation, lower labor time per point
- Material costs dominate the total bill
Rewiring (in an existing, finished home):
- Walls must be chased (cut open) to run new conduit
- Old wire must be pulled out
- Walls need to be filled and repainted after
- Labor costs dominate
If you're rewiring a finished home, get a quote that explicitly includes wall chasing, refilling, and finishing. Many electricians quote the wiring only — and hand you a surprise bill for the civil work afterward.
Material vs. Labor: How Your Wiring Bill Breaks Down
On average, materials account for 50–65% of total wiring costs in Pakistan. Labor takes up the remaining 35–50%.
Key materials and approximate 2026 costs:
- Copper wire (7/29 gauge, per 100 meters): Rs 4,500 – Rs 9,000 depending on brand
- Conduit pipe (per piece): Rs 80 – Rs 200
- Distribution board (8-way): Rs 2,500 – Rs 6,000
- Switches and sockets (per unit): Rs 150 – Rs 800 (local vs. branded)
- Circuit breakers (per unit): Rs 300 – Rs 1,200
The biggest place to get shortchanged is wire gauge and quality. Some electricians substitute thinner or aluminum wire without telling you. Always specify 100% copper wire and confirm the gauge before work begins — thinner wire overheats under load and is a fire risk.
How to Estimate Total House Wiring Cost in Pakistan
Start with your point count, then multiply by the per-point rate for your city.
Use this rough guide for a standard Pakistani home:
|
Home Size |
Estimated Points |
Estimated Total Cost (Labor + Materials) |
|---|---|---|
|
1-bedroom flat |
20–30 points |
Rs 30,000 – Rs 65,000 |
|
2-bedroom house |
30–45 points |
Rs 45,000 – Rs 100,000 |
|
3-bedroom house |
45–65 points |
Rs 65,000 – Rs 150,000 |
|
5-marla house (full) |
50–70 points |
Rs 75,000 – Rs 175,000 |
|
10-marla house (full) |
70–100 points |
Rs 100,000 – Rs 250,000 |
These ranges reflect variations in city, wire quality, and whether the work is new wiring or rewiring.
Three things that push your cost toward the higher end:
- Rewiring (vs. new construction wiring)
- Branded switches and sockets (e.g., MK, Clipsal)
- Larger distribution boards or additional sub-boards
Red Flags: Signs You're Being Overcharged
If an electrician refuses to break down labor and materials separately, walk away. Transparent contractors quote both. Here are other warning signs:
- Quoted rate is vague — "total job" with no point count mentioned
- No mention of wire brand or gauge
- Rewiring quote doesn't include wall chasing or finishing
- Rate per point is above Rs 3,000 without a clear justification
Get at least two quotes before committing. If one is 40% lower than another, ask both electricians to walk you through their point count and material specifications.
Get an Accurate Wiring Quote: What to Ask
Before you accept any wiring quote, confirm these five things:
- Total point count — how many points are included?
- Wire spec — what gauge and brand of copper wire?
- Labor vs. material split — what are you paying for each?
- Wall chasing — included or extra?
- Warranty — is there a workmanship guarantee, and for how long?
A reliable electrician will answer all five without hesitation. Vague answers on any of these usually mean the quote isn't firm.
Frequently Asked Questions
What is the average house wiring cost per point in Pakistan in 2026?
The average labor rate is Rs 800 to Rs 2,500 per point, depending on your city. Islamabad and Karachi tend to sit at the higher end; smaller cities like Faisalabad and Peshawar are generally lower. This is labor only — materials are an additional cost.
How many wiring points does a typical 3-bedroom house in Pakistan have?
A standard 3-bedroom house in Pakistan typically has 45 to 65 wiring points. This includes lights, fans, sockets, AC connections, and switch boards across all rooms, bathrooms, and the kitchen.
Is rewiring more expensive than new house wiring in Pakistan?
Yes. Rewiring costs 30–60% more than new wiring because it requires cutting open finished walls, removing old wire, and repairing surfaces afterward. Always confirm whether wall chasing and finishing are included in a rewiring quote.
What type of wire should be used for house wiring in Pakistan?
Use 100% copper wire — not aluminum. The standard gauge for domestic wiring in Pakistan is 7/29 (7 strands of 0.29mm copper). Thinner or aluminum wire is cheaper but overheats under normal household loads and increases fire risk.
How do I calculate the total wiring cost for my house?
Count every switch, socket, light fitting, fan connection, and AC point in your home — that's your total point count. Multiply it by the labor rate per point in your city, then add material costs separately. Use the table in this post as a baseline estimate.
Can I wire a house without a licensed electrician in Pakistan?
Technically, homeowners can hire any electrician, but unlicensed or unverified work carries serious safety and legal risks. For new construction, the wiring must pass LESCO, MEPCO, or your local utility's inspection before a meter connection is approved. Always hire a verified electrician who can provide documentation.
